#HOT PRODUCT

[NIST] Fibrous Glass Blanket for High Precision Measurements

등록일2024. 10. 17
조회수13
링크 복사하기
[NIST] Fibrous Glass Blanket for High Precision Measurements

[NIST] Product


어스바이오는 NIST 전문 취급점으로서 모든 제품을 전문적으로 취급 및 공급하고 있습니다.
NIST의 Physical Properties 제품 소개드립니다.
 

[NIST] Fibrous Glass Blanket for High Precision Measurements

 
Fibrous Glass Blanket for High Precision Measurements
 

Product Description:

This Standard Reference Material (SRM) is intended for use in the evaluation of a guarded hot plate (GHP) or the calibration of a heat flow meter (HFM). A unit of SRM 1452 consists of fibrous glass made into a low-density blanket bonded with phenolic resin. It is supplied as a fibrous glass batt of nominal dimensions 60 * 60 * 2.54 cm.
 

Product Information:

  • SKU: 1452
  • Availability: Available for Purchase
  • Unit of Issue: each
  • Valid until: Not Listed
  • NIST Storage Temperature: Ambient
  • Disposal: SRM 1452 should be disposed of in accordance with local, state, and federal regulations.


Directions for Use:

Specimens should be air-dried in an oven at a temperature not exceeding 375 K for 24 hours before any measurements are made. See the precautions below. Because the user test thickness will most likely be slightly different from the nominal thickness of 2.54 cm, the R-value, R, at a particular thickness, L, must be calculated from the relationship.
 


어스바이오(USBIO)는 NIST 전문 취급점입니다.
해당 제품에 대한 문의나 NIST 제품의 견적 또는 문의사항이 있으시면 아래로 연락주시기 바랍니다.
Tel : 02-862-2816 / email : bio@usbio.co.kr
관련 포스트